Erwan Adi Saputro

Universitas Pembangunan Nasional

Auliya Ichda

Universitas Pembangunan Nasional

Gelar Panji Gemilar

PT Petrokimia Gresik

Bandung Arry Sanjoyo

Institut Teknologi Sepuluh Nopember

DOI: https://doi.org/10.19184/rotor.v15i1.31079  

ABSTRACT 

In a process, industrial plants have several tools that require steam to help run the processing of a material. For the heating process, PT. Petrokimia Gresik requires steam. Sometime the steam leak during the process, so it reduces the productivity of this industry. For that reason, the purpose of this calculation is to find out the steam loss during the process, especially in urea globe control valve (PV-723, PV-726, PV-735). The result show that the upstream pressure and temperature at PV-723 are 21 kg/cm2G and 307 oC, upstream pressure and temperature in PV-726 are 5 kg / cm2G and 158 oC, upstream pressure and temperature on PV-735 of 2.5 kg / cm2G and 138 oC. For downstream pressure on all valves is 1.03323 kg/cm2G. The obtained mass flow (F) in each valve is 0.514 tons / hr, 0.86 tons / hr and 1,902 tons / hr. The value of the input mass balance of steam in the system is 82.70 tons/hour and the overall output is74.11 tons/hour. Therefore, the total steam loss in  PV-723, PV-726, and PV-735 is around 8.59 tons/hour which mean there are some leak during the process that need to do further investigation.

Keywords: Massa steam, steam loss, urea globe control valve, urea manufactured.

REFERENCES

[1] N. Maghfiroh, 2018, Dampak Industri PT Petrokimia Gresik terhadap Kehidupan Sosiokultural Masyarakat Sekitar Tahun 1980-2000,  Avatara, vol. 6 (1), pp. 102–113.

[2] Y. H. Imamnugroho, 2019, Laporan Kerja Praktek Departemen Produksi I B PT Petrokimia Gresik, Yogyakarta.

[3] PT Petrokimia Gresik, 2019, PT Petrokimia Gresik, https://petrokimia-gresik.com/, diakses pada 18 Januari 2021.

[4] B. Rahmandani, 2015, Analisa Pengaruh Kualitas Air Terhadap Kebocoran Pada Boiler Kapasitas 57 Ton/Jam 34 Bar, Teknobiz, vol. 5 (2), pp. 1-5.

[5] L. A. Prananto, F. B. Juangsa, R. M. Iqbal, M. Aziz, and T. A. F. Soelaiman, 2018, Dry steam cycle application for excess steam utilization: Kamojang geothermal power plant case study, Renewable Energy, vol. 117, pp. 157-165. doi: 10.1016/j.renene.2017.10.029.

[6] Y. Yang, X. Zhu, Y. Yan, H. Ding, and C. Wen, 2019, Performance of Supersonic Steam Ejectors Considering the Nonequilibrium Condensation Phenomenon for Efficient Energy Utilisation, Appl. Energy, vol. 242,pp. 157-167. doi: 10.1016/j.apenergy.2019.03.023.

[7] Iswanto, Jamaluddin, and F. Aidi, 2017, Studi Pengendalian Level Steam Drum 62-Fa-102 Menggunakan Pid Aplikasi PT Pupuk Iskandar Muda,” J. TEKTRO, vol. 1 (1), pp. 1.

[8] A. L. Nur, Azhar, and Muhaimin, 2018, Studi Pengendalian Tekanan Gas Pada Ammonia       Storage Tank (64-Fb-2001) di PT Pupuk Iskandar Muda,” J. TEKTRO, vol. 1, no. 1.

[9] Parcol, 2015, Speciality Control Vlaves for Urea Plants, Parcol, S.p.A., Italia.

[10] Y. Zhang, X. Zhang, M. Li, and Z. Liu, 2019, Research on Heat Transfer Enhancement and Flow Characteristic of Heat Exchange Surface in Cosine Style Runner, Heat Mass Transf. und Stoffuebertragung, vol. 55, pp. 3117-313. doi: 10.1007/s00231-019-02647-5.

[11] A. Yani and R. Ristyohadi, 2017, Analisis Kehilangan Steam dan Penurunan Temperatur pada Jaringan Distribusi Steam Dari PT. KDM ke PT. KNI, Turbo  J. Progr. Stud. Tek. Mesin, vol. 6(2). doi: 10.24127/trb.v6i2.558.